Instructions on how to make a Cyanotype

and some interesting historical notes on Cyanotypes.

 

(Leif Norman teaches a workshop on Cyanotypes for the CAC-ACCR)

Canadian Association for Conservation of Cultural Property

Winnipeg, MB     May 26-28, 2011

 

37th Annual CAC Conference         Printmaking: Artist Meets Conservator

Duration: One day – Wednesday, May 25, 2011
Start Time: 9 a.m.
Location: Martha Street Studio, 11 Martha Street, Winnipeg
Description: This workshop will introduce Conservators to printmakers and printmaking through lectures, discussion and hands on activities.  Participants will learn the basics of the composition and creation of intaglio prints and cyanotypes, as well as identification, deterioration, storage and care of these materials. A selection of historic prints will be available for participants to examine.  In the morning, participants will learn about intaglio prints and create an acetate etching.  In the afternoon, participants will learn about some historic photographic processes and create a cyanotype.  Supplies, breaks and lunch are included in the registration fee.

Instructors and Speakers Miriam Rudolph, Leif Norman, Crystal Maitland, Shelagh Linklater

 

Cyanotype workshop at the Conservators Conference:

Here are some detailed instructions:

…..

Put 40 grams of Potassium Ferricyanide in 500ml of water.

Put 100 grams of Ferric Ammonium Citrate (the green stuff not the brown stuff) in 500 ml of water.

Photographers Formulary has a good supply of Cyano Chemicals and other stuff.

Click here for the store!

Keep both solutions in brown or green bottles and preferably away from any light.

I put my solutions in old Grolsch bottles with the resealable tops. (Home brewers and home photo chemists LOVE these things.)

One should use distilled water instead of tap water. After a short while some sediment formed at the bottom of the bottle of Potassium Ferricyanide I had prepared. Probably because of trace amounts of iron in the tap water. It may not harm the process in the future, and the prints worked fine on the day of.

Mix even amounts of each solution in a yoghurt container, or what ever container is nearby. Probably should not be a metal one though. (30ml and 30ml should do it for coating dozens of pieces of paper.)

All of this can be done in regular indoor light.

Paint the solution on some thick paper, or cloth or wood, or almost anything porous that won’t fall apart when rinsed in water.

The solution is very watery. It is in fact, basically water, so be careful not to drip and splash it all over.

Let it dry in the dark. One coat should be enough. Adding a second coat after the first one has dried adds a little density but not enough to make the action worthwhile.

Drying takes about half an hour in the dark. Add a fan. It speeds it up.

The paper has to be bone dry before you expose it to sunlight otherwise odd foggy blooms will show up.

Three to four minutes in sunlight will work for Rayograms. (Rayograms are also called Schadographs, or Photograms.)

Rayograms are when you place random stuff like paperclips, lace, feathers, leaves etc… Directly onto the surface of the print.

Fun! Try your keys or sunglasses or office supplies.

The UV lamp normally used to expose screens for silkscreening processes did not work. 15 minutes under the bright UV lamp did not even equal 2 minutes in sunlight. (a cloudy day will work as well.)

People have told me a UV lamp has worked for cyanotypes, and I believe them, but in our case it did not work and the sun was very very quick.

Photographic Negatives will take fifteen minutes or so in sunlight. (You will need to put some glass on top to make sure the cyanotype paper is in good contact with the neg.)

You can see the chemicals actually reacting with the sunlight after about 30 seconds.

It will go from bright yellow greeny to a metallic grey dark blue.

To develop the print all you need to do is rinse it in water for about ten minutes.

Make sure all the yellow from the chemicals has washed out.

The Prussian Blue, or Turnbull’s Blue of the Cyanotype will darken as it dries after washing.

After the blue print has dried you can tone it brown by soaking it in strong Irish Breakfast tea.

(From what Martin tells me the tea can be room temperature.)

 

 

Here are some selections from books scanned by Google

from the 19th century that mention Cyanotypes.

The chemical language is a bit odd but it mostly makes sense.

 

From “Elements of Natural Philosophy” Golding Bird, 1848

“The class of cyanotypes are peculiarly beautiful, and some of them have

peculiar claims to our attention. One of the best is made by washing paper

with the red prussiate of potass, and when dry exposing it to the sun, with

the object to be copied pressed in close contact with it by a plate of glass.

The effect of the light is to evolve prussian blue, which remains fixed to the

paper. On soaking tbe picture thus produced in water, the unchanged prussiate

is removed, and a white picture on a beautiful blue ground results. This

easily prepared paper affords a ready and excellent means for copying ferns,

sea-weeds, lace-work, engravings, &c., but is not sufficiently delicate for the camera.

The most sensitive cyanotypes hitherto obtained are those prepared

by the following procedures, devised by Sir John Herschel.

Mix together equal parts of a cold saturated solution of bichloride of mercury

with one of the ammonio-citrate or iron, (1 part of the citrate to 11 of

water.) Before any precipitation occurs, wash over with this fluid a sheet

of yellow wove post-paper, and dry it. Paper thus prepared may be kept

for some time without becoming deteriorated. A piece of this should be

placed in the camera, until a decided, although faint impression is just visible.

It should then be removed and rapidly brushed over with a saturated solution

of the yellow prussiate of potass, diluted with three times its bulk of strong

gum· water. The picture gradually unfolds itself in an extremely beautiful

manner, and should be allowed to dry in the dark, where it should remain

for some days, when it will bear strong light, with impunity. If a picture

thus obtained be heated, it is converted from a blue positive, into a brown

negative one. By keeping, however, it recovers its positive character and original color.

In the cyanotype picture we have seen that an actual alteration of color,

and the conversion of a positive into a negative picture, take place by the mere application of heat.

The agent in producing this curious change is considered by Sir John Herschel

to consist of rays of some kind abounding in tbe red and orange bands

of the solar spectrum, and emitted by bodies heated just below redness.

These rays, for which the term of para-themic: has been proposed, appear to

bear the same relation to the true calorific rays as those· active in producing

chemical and photographic phenomena do to the chemical ones.”

From “The Silver Sunbeam” John Towler, 1873

“Cyanotype.-Float on a solution of the sesquichloride of

iron, dry and expose; afterward wash the prints, and then

immerse them in a bath of ferridcyanide of potassium. The

picture will appear of a blue color in all those places where

the sun has acted. Ferridcyanide of potassium has no action

upon the persalts of iron; on the protosalts, however, it

produces prussian blue.”

From “A Dictionary of Photography for the Amateur and Professional Photographer” E.J. Wall, 1889

“Cyanotype– A process discovered by Sir John Herschel,

which depends upon the reduction of red prussiate of potash

by light to Prussian blue. It is extremely useful for taking

rough proofs, and for copying engineers’ or architects’ plans.

The process of manufacture is as follows :-Herschel’s original process-

Ammonio-citrate of iron … 2  and a half ozs. 

Distilled water… 10 ozs.

Dissolve, and coat plain drawing paper with the solution by aid

of a buckle brush or tuft of cotton-wool. When dry, expose

under a negative, and develop on a solution of ferricyanide of

potash. Wash in dilute hydrochloric acid, and then in water,

and dry. The exposure required for this is very long, and

various modifications have been suggested. Another method,

giving blue lines on a white ground, is as follows:-

Potassium ferricyanide 600 grs.

Distilled water 5 ozs.

Ammonio-citrate of iron 600 grs.

Distilled water 5 ozs.

Dissolve the two salts separately, and mix the solutions, and

keep in the dark. Coat the paper as above, and when dry it

must be kept for four days before use. The paper is printed

in the usual manner, and merely washed in water till the

drippings are colourless. The fully exposed print should show

all detail, and have a bronzed-greenish appearance where the

light has acted, before washing. The exposure is usually double

that for ordinary silver paper. The following are great improvements,

as the duration of exposure is much shortened :-

Ferric chloride   480 grs.

Tartaric acid   480 grs

Distilled water 20 ozs.

Coat the paper as above, and dry quickly. Expose to direct

sunlight for about three or five minutes. No image is visible,

therefore experiment alone can determine the time, and develop on following :-

Potassium ferricyanide   480 grs.

Distilled water 7 and a half ozs.

When sufficiently developed, wash well, and dry. By the

following process positives may be obtained direct from positives :-

Gum arabic   720 grs.

Ferric chloride   480 grs.

Tartaric acid   240 grs.

Common salt   240 grs.

Distilled water   12 and a half ozs.

The paper is coated in the same manner as before, dried, and

exposed as usual, and developed by floating on a one-in-ten

solution of potassium ferricyanide; then immerse in a clearing

bath of hydrochloric acid, one in ten, wash, and dry. Several

methods have been proposed for obtaining black lines instead

of blue, but at present none are satisfactory-soaking in tannic

or gallic acid solution, floating on nitrate of silver, chloride of

gold, or perchloride of platinum.”